Tork Craft 9' 230Mm Polishing Bonnet Wool

Tie on polishing wool buff Diameter: Ø230mm Application: The polishing wool buff should be used with an automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is the same as the backing pad's diameter. It is necessary to polish a vehicle body panel when: The panel has been newly painted with a clear-coat. Shallow scratch marks need to be removed. The panel has suffered from oxidation. Swirl marks and hologram defects need to be removed. TIP: The buff is washable after use if the polishing compound is soluble. Tie on polishing wool buff range: ORDER NO. DIAMETER USE BACKING PAD MM4 Ø100mm MM5 Ø125mm TCBP125C / PG338 MM6 Ø150mm TCBP150C MM7 Ø180mm PG33805 MM7-2 Ø180mm PG33805 MM8 Ø200mm MM9 Ø230mm MM9-2 Ø230mm MM10 Ø250mm Recommended polishing compounds to use: Liquid Shine™ High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces. Liquid Shine™ Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks. Liquid Shine™ Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step